Hot water submersible pump unit (including the pump and the submersible motor composed of two parts), a pair of outlet flanges, 12 × 60 bolts 6. Or configure the corresponding outlet (to facilitate the user to install the hose installation), the use of maintenance instructions 1, 1 certificate of a packing list, wooden box packaging.
Appearance color
Common colors (when customer is not required): Phthalocyanine blue (chlorinated rubber paint) suitable for general non-corrosive water in the work of the unit spraying.
Anticorrosive coating
If used in corrosive high temperature occasions: first: can change the casting materials such as stainless steel, tin bronze, etc. Second: If the corrosion is not particularly serious can brush anti-corrosion coating epoxy finish, brush anti-corrosion coating Increase the service life of the unit.
Description:
1. Open the lower bucket.
2. Open the water hole and vent hole, with water pipes or water bottles to the water hole to add water, to the vent hole overflow water to fill.
3. Tighten the water injection hole, vent hole screw, and then install the suction bucket.
Instructions for use can refer to the QJ series submersible pump instructions.
Selection can refer to the QJ series submersible pump instructions.
没有评论:
发表评论