Deep well submersible pump installation need what tools

What tools are required to install the deep well submersible pump and how to install the outlet section?

Commonly used tools are to install the tower or tripod, winch and a number of special tools, including the chain clamp, pipe clamp, drive shaft bearing plate head and pipe clamps and so on.

Installation of the water section: Before installation, the packing gland, the packing ring and the retaining ring should be taken out, and then the water outlet section should be lifted to align the center line of the shaft hole with the drive shaft and maintain a steady, So that the drive shaft just out of the hole out of the shaft hole. Such as the water section lifting slightly skewed, both the installation of difficulties, but also may damage the drive shaft end of the thread, even when the shaft will cause serious bending deformation. Driving shaft after the use of bolts will pump pipe flange fastened to the water section, and then into the packing pressure ring and retaining ring.