Deep well submersible pump should pay attention to installation?

Deep well submersible pump should pay attention to installation? Well with submersible pump is one of the most common type of submersible pump, submersible pump in Shanghai expert points out, at the time of installation of Wells with submersible pump, check and pay attention to ready for work. The following about Wells with submersible pump installation considerations. First, before installation to check whether water Wells is suitable for the use of submersible pump, including caliper, vertical and borehole wall quality and so on. Second, check the power supply device can guarantee the pumps running, check the pump circuit, check whether the control and protection system is safe, finally ready for installation tools, the other should also be familiar with the manual again before installation, according to the requirements on the manual operation. Third, ready to do a good job after began to install submersible pump. Filter water, before you install the motor lumen fresh water injection, must fill, to check whether the motor is leaking, there is no damage to cables and connectors, there are any problems timely processing. Fourth protection switch and start-up equipment, set up, to tighten the bolts and convenient board, water filter, etc., ready to install the well. Then put the pump into the well, for installation. If the pump is stuck, attention will not be able to force pump, otherwise easily jammed. When installing a open well submersible pump, prohibited personnel under the well.