Many users in the use of submersible pump process of the phenomenon of submerged pump motor burned, but do not know the reasons for the submarine pump motor burned, usually submersible pumps are not leaking, leakage, overload protection devices, if necessary, these devices in the order If you use the submersible pump does not have these features then in the course of the event if there is leakage, leakage, overload phenomenon is very prone to the phenomenon of submersible pump motor burned.
Specific reasons for the submerged pump motor burned as follows:
1, due to the use of submersible pump head is too low and the head of the pump is higher than the actual price of more than 5 meters head will cause large current flow caused by the phenomenon of the rise, the solution is to close the small pump outlet valve to increase its resistance to reduce Outlet flow control current.
2, the submersible pump motor is the need to be submerged by the use of water, submersible motor cooling mainly by water cooling if the motor leakage of water without water cooling motor temperature will rise rapidly can easily lead to the phenomenon of motor burned.
3, if the liquid is less than 80 degrees within the hot water, hot water submersible pumps must be used Hot-water submersible pumps are usually stainless steel jacket with external cooling water cooling products, the use of external cooling water must be, if not connected The water cooling motor is sure to cause the motor to burn out because the medium temperature is too high to cool the motor.
4, due to submersible pump mechanical seal suffered idling or the value of the value of liquid corrosion caused by mechanical seal damage, so that the motor water will cause the motor burned. If supporting the corresponding leak sensor supporting the use of control cabinet can be avoided. In the absence of this configuration, it is recommended that the submersible pump be replaced regularly.
5, because the power cord is not a good contact and other contact causes motor missing items will burn the motor.
Do not immerse in the water for a long time submersible pump, the motor should be checked before starting the coil insulation and phase to ground insulation.
With leakage leakage overload protection function of the pump can use: high temperature submersible pumps.
2017年2月6日星期一
How to Prevent Submersible Pump Motor from Burnout
Motor is one of the main power equipment, while the submersible pump motor burn is common. To avoid the motor burned in operation, in addition to running before the necessary technical protection measures to protect the outside, the following "six strokes" the most effective.
1 Always keep the motor clean
In the operation of the motor, at least 3m around the inlet is not allowed to dust, water stains and other debris to prevent the suction motor internal, the formation of short-circuit medium, or damage the wire insulation, resulting in short circuit current increases, the temperature rise Burn the motor. Therefore, to ensure that the motor has sufficient insulation resistance, as well as a good ventilation cooling environment in order to make the motor in a long time to maintain safe and stable operation of the state.
2 Keep the motor operating at rated current
Motor overload operation, the main reason is due to drag the load is too large, the voltage is too low, or driven by mechanical stuck caused. If the overload time is too long, the motor will absorb a large number of active power from the power grid, the current will increase sharply, the temperature will rise, the motor insulation will burn aging failure. Therefore, the motor is running, pay attention to always check whether the transmission is running flexible and reliable; concentricity is the standard coupling; gear transmission flexibility and so on. If you find a lag card phenomenon, should immediately stop the machine to find out the reasons for troubleshooting and then run.
3 Always check the motor three-phase current balance
Three-phase asynchronous motor, the three-phase current of any one phase current and the other two current average difference does not allow more than 10%, so as to ensure the safe operation of the motor. If more than that the motor is faulty, must be identified.
4 Check the temperature of the motor Always check the motor bearing, stator, shell and other parts of the temperature with or without abnormal changes
Especially for the no voltage, current and frequency monitoring and no overload protection of the motor, the temperature monitoring is more important. Motor bearings are overheating, lack of oil, if found near the bearing temperature is too high, it should immediately stop inspection. Bearing the rolling body, raceway surface with or without cracks, scratches or missing missing, bearing clearance is too large shaking, the inner ring on the shaft with or without rotation and so on. Any of the above-mentioned phenomena. Must be renewed bearing before re-operation.
5 observe whether the motor vibration, noise and abnormal smell
If the motor vibration occurs, it will cause the load part of the load connected with increased heart rate, the formation of motor load increases, overload operation, it will burn the motor. Therefore, the motor is running, especially the high-power motor should always check the anchor bolts, motor cover, bearing glands are loose, grounding device is reliable and found a timely manner to solve the problem. Sound and smell of the noise field is abnormal motor operation, then a serious precursor to failure, you must always find and identify the cause of surface excluded.
6 Ensure that the startup device is working properly
The technical state of the motor starting equipment plays a decisive role in the normal starting of the motor. Practice has proved that the vast majority of burned motor, the reason most of the starting equipment is not working properly caused. Such as starting the device phase start, contactor contacts arc, ignition and so on. The maintenance of the starting equipment is mainly cleaning, fastening, such as the contactor contact is not clean contact resistance will increase, causing fever to burn contacts, resulting in phase loss and burn the motor; contactor coil suction core corrosion and dust Product, will make the coil lax, and a strong noise, increasing coil current, burned coil and cause failure.
Therefore, the electrical control cabinet should be located in dry, ventilated and easy to operate position, and regularly dust. Always check the contactor contacts, coil core, the wiring screws are reliable, mechanical parts of the action is flexible, to maintain a good state of technology, so as to ensure smooth start without burning the motor.
1 Always keep the motor clean
In the operation of the motor, at least 3m around the inlet is not allowed to dust, water stains and other debris to prevent the suction motor internal, the formation of short-circuit medium, or damage the wire insulation, resulting in short circuit current increases, the temperature rise Burn the motor. Therefore, to ensure that the motor has sufficient insulation resistance, as well as a good ventilation cooling environment in order to make the motor in a long time to maintain safe and stable operation of the state.
2 Keep the motor operating at rated current
Motor overload operation, the main reason is due to drag the load is too large, the voltage is too low, or driven by mechanical stuck caused. If the overload time is too long, the motor will absorb a large number of active power from the power grid, the current will increase sharply, the temperature will rise, the motor insulation will burn aging failure. Therefore, the motor is running, pay attention to always check whether the transmission is running flexible and reliable; concentricity is the standard coupling; gear transmission flexibility and so on. If you find a lag card phenomenon, should immediately stop the machine to find out the reasons for troubleshooting and then run.
3 Always check the motor three-phase current balance
Three-phase asynchronous motor, the three-phase current of any one phase current and the other two current average difference does not allow more than 10%, so as to ensure the safe operation of the motor. If more than that the motor is faulty, must be identified.
4 Check the temperature of the motor Always check the motor bearing, stator, shell and other parts of the temperature with or without abnormal changes
Especially for the no voltage, current and frequency monitoring and no overload protection of the motor, the temperature monitoring is more important. Motor bearings are overheating, lack of oil, if found near the bearing temperature is too high, it should immediately stop inspection. Bearing the rolling body, raceway surface with or without cracks, scratches or missing missing, bearing clearance is too large shaking, the inner ring on the shaft with or without rotation and so on. Any of the above-mentioned phenomena. Must be renewed bearing before re-operation.
5 observe whether the motor vibration, noise and abnormal smell
If the motor vibration occurs, it will cause the load part of the load connected with increased heart rate, the formation of motor load increases, overload operation, it will burn the motor. Therefore, the motor is running, especially the high-power motor should always check the anchor bolts, motor cover, bearing glands are loose, grounding device is reliable and found a timely manner to solve the problem. Sound and smell of the noise field is abnormal motor operation, then a serious precursor to failure, you must always find and identify the cause of surface excluded.
6 Ensure that the startup device is working properly
The technical state of the motor starting equipment plays a decisive role in the normal starting of the motor. Practice has proved that the vast majority of burned motor, the reason most of the starting equipment is not working properly caused. Such as starting the device phase start, contactor contacts arc, ignition and so on. The maintenance of the starting equipment is mainly cleaning, fastening, such as the contactor contact is not clean contact resistance will increase, causing fever to burn contacts, resulting in phase loss and burn the motor; contactor coil suction core corrosion and dust Product, will make the coil lax, and a strong noise, increasing coil current, burned coil and cause failure.
Therefore, the electrical control cabinet should be located in dry, ventilated and easy to operate position, and regularly dust. Always check the contactor contacts, coil core, the wiring screws are reliable, mechanical parts of the action is flexible, to maintain a good state of technology, so as to ensure smooth start without burning the motor.
Development Trend of Submersible Pump Industry in 2017
A wide range of pumps, then what type of pump is our most widely used? What are their product requirements? Mainly in what areas?
Pump industry, the top ten online search are submersible pumps, fire pumps, vane pumps, centrifugal pumps, diaphragm pumps, self-priming pump, screw pump, booster pump, gear pump, mud pump. Among them, search index of submersible pump 881 accounted for 20%, fire pump search index 553 accounted for 12% ranked second, vane pump search index 552 accounted for 12% ranked third. Next let us take a look at the top of the submersible pump, he has any charm?
The production and sale of the wells with submersible pumps will be affected by the overall prosperity of the national economy and the disposable income of residents. However, because the wells with submersible pumps are mainly to meet people's most basic needs of the production and life, its demand is relatively rigid, so do not have a clear periodicity.
Wells with submersible pumps are widely used in production and living water, agriculture, forestry, irrigation and factories, mines and other areas of water supply and drainage, does not have obvious seasonal.
From the user needs to search we can see that the sewage submersible pumps, models, parameter search heat higher. Submersible pump is an important equipment to deep water, the use of the whole unit into the water work. On the use of media, the submersible pumps can be divided into clean water submersible pumps, sewage submersible pumps, submersible pumps (corrosive) three categories. With the development of science and technology and the progress of society, the development of submersible pumps is getting faster and faster, and the study of its type and parameters becomes more and more important.
From the geographical distribution of the search point of view, the user is mainly located in the South China East China, the current domestic wells with submersible pumps production enterprises are mainly concentrated in Zhejiang, Guangdong, Shandong and other places, of which the industry is most concentrated in Wenling City, Zhejiang Province, Submersible pump about 60% of the production and sales from Wenling City.
Summary: Submersible pump for the pump on behalf of the product is leading the entire pump industry continue to move forward, with the wells with the gradual popularization of the pump and the expansion of applications, wells with submersible pumps must adapt to more different environmental requirements. With the market feedback data accumulation wells with submersible pumps are gradually to the efficient, energy saving, environmental protection and the direction of development
Pump industry, the top ten online search are submersible pumps, fire pumps, vane pumps, centrifugal pumps, diaphragm pumps, self-priming pump, screw pump, booster pump, gear pump, mud pump. Among them, search index of submersible pump 881 accounted for 20%, fire pump search index 553 accounted for 12% ranked second, vane pump search index 552 accounted for 12% ranked third. Next let us take a look at the top of the submersible pump, he has any charm?
The production and sale of the wells with submersible pumps will be affected by the overall prosperity of the national economy and the disposable income of residents. However, because the wells with submersible pumps are mainly to meet people's most basic needs of the production and life, its demand is relatively rigid, so do not have a clear periodicity.
Wells with submersible pumps are widely used in production and living water, agriculture, forestry, irrigation and factories, mines and other areas of water supply and drainage, does not have obvious seasonal.
From the user needs to search we can see that the sewage submersible pumps, models, parameter search heat higher. Submersible pump is an important equipment to deep water, the use of the whole unit into the water work. On the use of media, the submersible pumps can be divided into clean water submersible pumps, sewage submersible pumps, submersible pumps (corrosive) three categories. With the development of science and technology and the progress of society, the development of submersible pumps is getting faster and faster, and the study of its type and parameters becomes more and more important.
From the geographical distribution of the search point of view, the user is mainly located in the South China East China, the current domestic wells with submersible pumps production enterprises are mainly concentrated in Zhejiang, Guangdong, Shandong and other places, of which the industry is most concentrated in Wenling City, Zhejiang Province, Submersible pump about 60% of the production and sales from Wenling City.
Summary: Submersible pump for the pump on behalf of the product is leading the entire pump industry continue to move forward, with the wells with the gradual popularization of the pump and the expansion of applications, wells with submersible pumps must adapt to more different environmental requirements. With the market feedback data accumulation wells with submersible pumps are gradually to the efficient, energy saving, environmental protection and the direction of development
Submersible pump normal start-off step
First, the submersible pump starts
1, check whether the loosening of electrical lines, field and Far EasTone instruments, control valves are qualified;
2, check the angle of bolt, pipe and flange is loose, the valve switch is flexible;
3, check whether the motor cavity filled with water, to ensure that the motor cavity filled with water;
4, hand rotation coupling 2 to 3 laps, should feel relaxed and light weight uniformity, and pay attention to distinguish between the pump and the friction sound of foreign objects such as rolling noise, if any should try to rule out, and the coupling guard Installed;
5, open the circulating cooling water inlet and outlet valves, close the communication valve, observe the circulating cooling water line on the pressure gauge;
6, open the pump suction pipeline valve, the liquid filled pump, open the vent valve, rotate the coupling, remove the pump gas; check the process pipeline valve should be in the open pump position;
7, close the export pipeline valve, start the motor;
8, to be stable pump speed, ammeter to the specified location, the pump after the pressure gauge instructions to rise, slowly open the export pipeline valve, according to process requirements to regulate the export flow.
9, a comprehensive inspection for any abnormalities, such as a serious leak, vibration, sharp sound, temperature rise is too high and so on, immediately stop the pump.
Second, the submersible pump shut down
1, close the pump outlet valve;
2, press the stop pump button, pay attention to the motor idle time;
3, close the inlet valve, disconnect with the process
1, check whether the loosening of electrical lines, field and Far EasTone instruments, control valves are qualified;
2, check the angle of bolt, pipe and flange is loose, the valve switch is flexible;
3, check whether the motor cavity filled with water, to ensure that the motor cavity filled with water;
4, hand rotation coupling 2 to 3 laps, should feel relaxed and light weight uniformity, and pay attention to distinguish between the pump and the friction sound of foreign objects such as rolling noise, if any should try to rule out, and the coupling guard Installed;
5, open the circulating cooling water inlet and outlet valves, close the communication valve, observe the circulating cooling water line on the pressure gauge;
6, open the pump suction pipeline valve, the liquid filled pump, open the vent valve, rotate the coupling, remove the pump gas; check the process pipeline valve should be in the open pump position;
7, close the export pipeline valve, start the motor;
8, to be stable pump speed, ammeter to the specified location, the pump after the pressure gauge instructions to rise, slowly open the export pipeline valve, according to process requirements to regulate the export flow.
9, a comprehensive inspection for any abnormalities, such as a serious leak, vibration, sharp sound, temperature rise is too high and so on, immediately stop the pump.
Second, the submersible pump shut down
1, close the pump outlet valve;
2, press the stop pump button, pay attention to the motor idle time;
3, close the inlet valve, disconnect with the process
Cause Analysis of Submersible Pump 's Trip after Water
The submersible pump was operated normally before it was launched, but it did not trip for 10 minutes after it was launched. In this case the possibility of wire leakage is large. From the signs we will say is diving into the underwater pump leakage. However, in my experience, if the submersible pump leakage, often in the water immediately after the opening of a trip, (one or two seconds). It is advisable to check the wires in the incoming water for damage or joints. Seal of these places there is a bad seepage process, often appear ten seconds, tens of seconds after the trip. This situation is very simple maintenance. If not route leakage, it can only be a leakage inside the pump. Circuit part of the water leakage caused by short circuit after the water. Leakage, and as soon as possible to repair the pump quality is poor, closed lax, the insulation dropped after the water caused by short circuit current increases, resulting in switch tripping. Pump insulation is not enough or the cable connector is not connected
Cause of Overload Current of Submersible Pump Motor and Its High Temperature and Its Solution
Submersible pump current is too large The main reason for overload or overtemperature:
(1) operating voltage is too low or too high; check the power supply voltage, adjust the transmission voltage.
(2) There are static and dynamic components within the pump or contact with the impeller seal ring friction; to determine the location of friction parts to eliminate failure.
(3) low head, large flow caused by motor power and pump characteristics do not match; adjust the valve to reduce the flow, so that the motor power and pump to match.
(4) pumping density or high viscosity; check the water quality changes, change the working conditions of the pump
(5) bearing damage; replace the motor at both ends of the bearing
(1) operating voltage is too low or too high; check the power supply voltage, adjust the transmission voltage.
(2) There are static and dynamic components within the pump or contact with the impeller seal ring friction; to determine the location of friction parts to eliminate failure.
(3) low head, large flow caused by motor power and pump characteristics do not match; adjust the valve to reduce the flow, so that the motor power and pump to match.
(4) pumping density or high viscosity; check the water quality changes, change the working conditions of the pump
(5) bearing damage; replace the motor at both ends of the bearing
What is the advantage of cast iron material deep well pump
What is the advantage of cast iron material deep well pump
The first dynamic strong
Water pumps need to be transformed by the power, so that the water pumped to the top of the processing. This cast iron material can enhance the power to help you in the pump application style has made extensive progress and play to ensure that the pump application style to achieve the desired effect of rendering.
The use of cast iron deep well pump to help, both on the pump to improve the quality, at the same time the effect has also reached a very good quality, become more and more areas are using the pump.
The second method of operation is simple
In the process of using the cast iron deep well pump, the simplicity and convenience of the operation steps can not only make the application effect of the water pump reach the idealized style, but also achieve the prominent effect in the applied state. Traditional water pumps are susceptible to water erosion, so that the water quality of a certain quality problems, and now carried out outside the cast iron reinforcement treatment, extending the length of the pump in the water.
The first dynamic strong
Water pumps need to be transformed by the power, so that the water pumped to the top of the processing. This cast iron material can enhance the power to help you in the pump application style has made extensive progress and play to ensure that the pump application style to achieve the desired effect of rendering.
The use of cast iron deep well pump to help, both on the pump to improve the quality, at the same time the effect has also reached a very good quality, become more and more areas are using the pump.
The second method of operation is simple
In the process of using the cast iron deep well pump, the simplicity and convenience of the operation steps can not only make the application effect of the water pump reach the idealized style, but also achieve the prominent effect in the applied state. Traditional water pumps are susceptible to water erosion, so that the water quality of a certain quality problems, and now carried out outside the cast iron reinforcement treatment, extending the length of the pump in the water.
订阅:
博文 (Atom)