Submersible Fountain pump working principle

QS submersible fountain pump is a fountain dedicated pump, the pump motor material using high-quality cold-rolled Xianguang, increase the number of motor windings and diving line diameter, cable with three-phase four-wire JHS fountain dedicated cable, impeller increased The anti-loosening device, the motor cavity using imported anti-rust enamel, through the above structure to improve the submersible pump inertia is small, so the response speed, bearing the use of high-performance dedicated shaft, improve the insulation level, so as to meet the frequent needs of the music fountain frequent start.
What is the working principle of the fountain pump? The following legislation will be the new irrigation and drainage equipment will introduce the working principle of the fountain pump.
Before opening the fountain pump, the suction pipe and the pump must be filled with liquid. After the pump is pumped, the impeller rotates at high speed, and the liquid rotates with the blade. Under the action of centrifugal force, it leaves the impeller outward and the liquid is gradually slowed down in the pump chamber, and the pressure gradually increases, Pump outlet, discharge pipe out.
At this point, at the center of the blade at the center of the liquid is thrown to the surrounding and the formation of both no air and no liquid vacuum low pressure area, liquid pool in the pool of atmospheric pressure under the action of the suction pipe into the pump, the liquid is so continuous Constantly being sucked up from the liquid pool and continuously flowing out of the discharge pipe.