2017年2月9日星期四

Prevention and treatment of fountain pump freezing

The northern region of the water system used mostly fountain pumps for the self-priming pump, a winter easy to ice, for this situation we should take the following measures on the water pump on the line maintenance.
1. The fountain pump water emptying, when used with water. To prevent the freezing of water pump pump freezing.
2. If the fountain pump freezes, use hot water or boiling water to pump into the ice. Or heat the pump housing.
3. Use a downhole pump. Fountain pump will be placed underground, the general underground pump deep from the ground, will not freeze.
4. The use of insulation-type pumps. Add the insulation to steam or hot water. To prevent the pump from freezing.
5. Using non-self-priming centrifugal pump. Use, add water can be.
6. Place the pump in an ambient temperature environment. Below zero.

The following six note for the winter pump. To a lot of maintenance to prevent cracking water pump, shorten the life of the pump.

Features of Stainless Steel Submersible Pump

Stainless steel submersible pump is a beautiful appearance, the surface bright as a mirror, feel tough and cold, is more avant-garde submersible pump type. Stainless steel submersible pumps are 316 and 317 stainless steel two, these two kinds of stainless steel pumps have their own advantages, the following specific analysis of the difference between the two.
316 and 317 stainless steel is better than 310 and 304 stainless steel, 316 stainless steel is more widely used, it has good corrosion resistance, often used in marine environments. This is because 316 stainless steel is not only resistant to marine erosion, but also to avoid corrosion of industrial atmosphere.
In welding, 316 stainless steel welding performance is more good, you can use standard welding methods to welding, welding time to take into account the use of the choice of different welding materials for welding. The use of 316L stainless steel does not require post-weld annealing. Heat resistance, 316 stainless steel has a strong resistance to oxidation.
316 stainless steel has the above mentioned advantages and widely used in heavy industry, light industry, household goods and construction industry, if you want to buy stainless steel submersible pumps, then it can consider the purchase of 316 stainless steel submersible pumps. Do not be cheap to buy to inappropriate products, otherwise it will affect the use of submersible pumps, but also for future maintenance and replacement equipment to bring great trouble and unnecessary cost.

Hot water submersible pump instructions in winter

Hot water submersible pump is an essential equipment for extracting high temperature water. Can also be used for ponds, tanks, pressurized use. Specific can be used for hotel hot springs underground water, district heating.

Scope of application
For enterprises and institutions such as: hot spring bath, residential heating, geothermal energy companies use power generation, extraction of underground hot water, according to different calibers we have different specifications for the user to choose models. The device low noise, high efficiency and save energy.
Technical Parameters:
1: Allowable operating water temperature range: +5 to +105 ℃
2: Solid impurity content (mass ratio) is not more than 0.01%
3: PH value (pH) 6.5-8.5
4: hydrogen sulfide content of not more than 1.5mg / L
5: chloride ion content of not more than 400mg / L
6: crew must completely invade the water work. Vertical use, select the model diameter and pump models to match, should not use large diameter diameter of the small diameter of the pump, this is not conducive to the motor cooling.
Motor parameters
Submersible motor lead length: 3m. If you need to extend the cable can call us in advance, submersible motor water lubrication, the use of the motor cavity must be filled with clean water, (Note: be sure to fill otherwise will reduce the motor life) If you forget to add water motor will Rapid burnout.
Motor protection class: IPX8
Electromagnetic wire adopts high temperature waterproof wire.
power supply
380V, the deviation does not exceed ± 5%, the frequency of 50HZ, the deviation does not exceed ± 1%, if the customer needs special voltage or special frequency need to inform us in advance.
material
Impeller: cast iron HT200, or tin bronze (various brands) such as: ZCuSn3Zn8Pb6Ni1
Pump housing: cast iron HT200, or stainless steel such as: 2Gr13. 304 316
Pump shaft: cold-drawn steel chrome-plated, or stainless steel 2Gr13 (1050 ℃ quenched and tempered to enhance the torque)
Motor Seal: Rubber Seal O-Ring; Machine Seal.
Motor expansion regulating bladder rubber material.
Equipment advantages
– 1: Careful assembly at the factory ensures fast and reliable installation on site
– 2: single-stage impeller or multi-stage impeller in series, the noise is minimal. Temperature performance, long life.
– 3: the crew can completely invade the water work, to avoid the vacuum pump easy to enter the air is not easy to use the drawbacks,
Scope of supply:
Hot water submersible pump unit (including the pump and submersible motor composed of two parts), the outlet matching flange one, 12 × 60 bolts 6. Or configure the corresponding outlet (for users to install hose), the use of maintenance manual 1, 1 copy of certificate of packing list, wooden box packaging.

2017年2月8日星期三

Fountain pump electrical installation matters

Fountain pump electrical installation should pay attention to what needs?

1, three-phase fountain pump cable selection of three-phase four-core, one of the yellow-green and white core wire to ground, to a reliable grounding. If there is no fixed ground, you can use 1.5 meters long metal rod buried in the wet soil as a ground, the other three front connected to the three-phase power supply can be.

2, the power supply voltage fluctuation range of ± 10% of the additional voltage, or will shorten the motor life or burn out. If the fountain pump to use away from the power source, you should bold the power transmission line useful section, or will not work.

3, wire connection and wire selection, please read the instruction manual, in accordance with the requirements of manufacturers to purchase, to ensure that the fountain pump work.

4, in the installation process have doubts, please contact the manufacturer as soon as possible to help solve the problem.

Fountain pump with what type of motor is best

Fountain pump commonly used small water-filled submersible pump.

Fountain-specific pump housing, flow components and external parts are made of cast iron or stainless steel (304,316,316 L) made, and the product also retains the original fountain pump performance.

Fountain Pump Features:

1, the use of cast iron or stainless steel materials, improve pump corrosion resistance. In this case,
2, impeller with special materials to prevent the impeller when the impeller loose. Fountain dedicated pump
3, leakage protection measures: fixed potential grounding device. In this case,
4, Based on the original ordinary pump, according to the requirements of the fountain special pump, the company after several tests, in the continuous development of technology, processing materials, continuous improvement, so that the fountain pump can start frequently, fully suitable for musical fountain use. In this case,
5, the pump shield with stainless steel filter, three-phase four-wire cable. In this case,
6, stainless steel fountain pump for automatic water injection function. In this case,
7, the motor is self-circulating cooling water-filled.

Hot water submersible pump personal technology latest breakthrough

Hot water submersible pump personal technology latest breakthrough
   Has long heard of hot water submersible pump, in today's life in the use of ways, whether artificial hot spring pool or industrial ironworks, the use of hot water submersible pumps have entered a mature stage, industrial ironmaking often used Hot water submersible pump to pump cooling, each cooling after the water temperature will rise, so that later, forty or fifty degrees are possible, together with the ironworks itself, the internal temperature is high, the use of submersible pumps has brought severe Of the test.
    Submersible pumps generally do not apply to the field of high temperature, do not look hard stainless steel submersible pump, for the general collision is not on the heart, but once into the high temperature environment, the submersible pump will automatically appear problems. High temperature will make the internal failure of submersible pumps, the load is too large may also cause an explosion, but the latest heat insulation technology has been applied to the hot water submersible pump, through the renovation and replacement of insulation film, now hot water submersible pumps More practical significance, the individual need not worry too much, of course, can be improved from the performance, through the superiority of the performance, so that hot water submersible pump overall pumping power to mention up, so that makes the industry more convenient to use, More practical, more conducive to industrial use of submersible pumps, the factory's work life also has some help.
    Submersible pump price is not high, but the failure of the indirect loss to the plant will be great, how to prevent the hot water submersible pump in the course of the process will not be easily damaged, it is necessary to maintain at any time, Regardless of the submersible pump has failed to have regular checks to ensure that the submersible pump will not because of technical errors and the emergence of many unnecessary fault problems.

Hot water submersible pump use range

With the hot water submersible pump configuration of the pump structure of the different types of submersible pumps are also different characteristics. For centrifugal pumps or Francis pumps, the shaft power required for the pump is reduced when the head is used in excess of the rated head, and the shaft power required for the pump is increased when the head is used below the rated head. When the head is reduced a lot, the shaft power required by the pump will be greatly increased. At this time, the load of the submersible pump will increase and the stator current will increase and the stator windings will tend to overheat. If the submersible pump for a long time in low head, high flow operation, the stator around the heat is very powerful, often burn the motor. For axial flow pumps, the opposite is true: when the head is low and the rated head is used, the shaft power required by the pump is reduced; when the used head exceeds the rated head, the shaft power required by the pump increases; The shaft power required for the hot water submersible pump will be greatly increased when the head lift is higher than the rated head, and the stator windings of the submersible pump will overheat. If the axial flow submersible pump for a long time in the high-head operation, the stator winding heat is very powerful, often burn the motor. Submersible pump can generally 0.7-1.2 times the rated flow range of normal operation (sewage sewage submersible pump can be 0.7-1.3 times the rated flow range of normal operation), beyond this range, may produce overload, requiring users to Selection and use of submersible pump, you must consider the appropriate scope of use. Especially for multi-stage wells with submersible pumps, the more need to pay attention to: high-lift submersible pump, not too low for the head, so as not to waste energy, but also damage the hot water submersible pump.