Weihu submersible pump manufacturers combined with many years of experience in pump system, professional team for your analysis of submersible pumps supporting the reasons for overheating the motor,
First, the power source of the reasons: the voltage is too high or low, under a specific load, if the voltage range should be in the range of +10% to -5% of the rated value will cause the motor overheating; power three-phase voltage asymmetry, Phase-to-phase voltage interphase imbalance of more than 5%, will lead winding overheating; phase operation, experience shows that more than 85% of agricultural motor is burned due to lack of phase operation caused by motor phase protection device should be installed.
Second, the reasons for submersible pumps: selection of power is not complete, small horse-drawn carts, motor overload operation for a long time, so that the motor temperature is too high; start too frequently, fixed or short-time intermittent work of the motor system for continuous work. Should limit the number of starts, the correct choice of thermal protection, according to the calibration of the motor using the quota.
The stator windings are short-circuit, inter-turn short-circuit or local grounding, light when the local overheating of the motor, in severe cases when the insulation is not connected to the motor, Burnout; squirrel cage rotor broken or defective, the motor running 1 to 2 hours, the core temperature increased rapidly; ventilation system failure, should check whether the fan is damaged, the direction of rotation is correct, whether the ventilation duct blockage; Eccentric cleaning chamber so that the stator and rotor core phase wiping metal impact sound, the rapid increase in core temperature, a serious electric motor smoke, and even coil burned.
Fourth, the working environment reasons: the motor winding damp or dust, oil, etc. attached to the winding, resulting in lower insulation. The insulation resistance of the motor should be measured and cleaned, dried; the ambient temperature is too high. When the ambient temperature exceeds 35 ℃, the inlet air temperature is high, the motor temperature is too high, should try to improve their working environment. Such as scaffolding shade.
Reminded: due to electrical causes of failure, should be requested to obtain professional qualification certificate of electrical maintenance, knowledgeable people can not blindly repair, to prevent the occurrence of personal injury accidents.
2017年1月18日星期三
Assembly Process Analysis of Deep Well Submersible Pump
Deep well submersible pump installation requirements rubber ring surface intact, remove the old circle is not allowed to re-use, the new rubber ring should be 2% to 5% of the amount of stretch, circle body is not allowed to flip, can not fall into the motor interior or Damaged by mouth. Tighten the bolts should be tightened in turn, section compression rate to ensure that 15% to 25% or so to prevent the ring body compression or excessive compression caused by sealing failure. Shaft seal: shaft seal is generally located in the shaft extension side of the motor, the use of rotating shaft lip seal (skeleton oil seal), is a rotary seal, which consists of elastic lip, metal frame, spring three parts. Applicable line speed up to 30m / s. It is mainly to prevent impurities in the water and sand into the submersible pump interior. Attention should be paid to maintain the correct position of the spring assembly to prevent spring force from overflowing.
Thermal protection Built-in thermal protection is a bimetal-type protection element, commonly used in dry submersible pumps. When used in series with the motor windings, the motor can provide thermal overload, phase loss and stall protection, the action life of more than 1000 times. For three-phase submersible pumps, the thermal protector is connected to the winding center of the Y-connected. For single-phase submersible pumps, the thermal protector is connected in series with the primary and secondary windings. Pressure test with double-sided mechanical seal or double-track single-ended mechanical seal dry and oil-filled submersible pump should be assembled after the pressure test, the test pressure is generally generated by the compressed air pump, no conditions can be used high-pressure air cylinder string pressure gauge instead of air pump. The pump-side seal shall be subjected to the test pressure equal to the maximum pump head pressure, but shall not be less than 0.2 MPa. The pressure test shall last for 5 min and the seal shall be free of leakage. The inner cavity of the motor and the seal on the motor side shall be capable of withstanding a pressure test of not less than 0.2 MPa for 5 min without leakage or other anomalies
Thermal protection Built-in thermal protection is a bimetal-type protection element, commonly used in dry submersible pumps. When used in series with the motor windings, the motor can provide thermal overload, phase loss and stall protection, the action life of more than 1000 times. For three-phase submersible pumps, the thermal protector is connected to the winding center of the Y-connected. For single-phase submersible pumps, the thermal protector is connected in series with the primary and secondary windings. Pressure test with double-sided mechanical seal or double-track single-ended mechanical seal dry and oil-filled submersible pump should be assembled after the pressure test, the test pressure is generally generated by the compressed air pump, no conditions can be used high-pressure air cylinder string pressure gauge instead of air pump. The pump-side seal shall be subjected to the test pressure equal to the maximum pump head pressure, but shall not be less than 0.2 MPa. The pressure test shall last for 5 min and the seal shall be free of leakage. The inner cavity of the motor and the seal on the motor side shall be capable of withstanding a pressure test of not less than 0.2 MPa for 5 min without leakage or other anomalies
Structure Description of Multistage Deep Well Submersible Pump
1, multi-stage deep well submersible pump unit by: pumps, submersible motors (including cables), water pipes and control switch four major components.
The submersible pump is a single-suction multi-stage vertical centrifugal pump. The submersible motor is a wet-type, vertical three-phase cage induction motor. The motor and water pump are directly connected by a claw type or single cartridge type coupler. Equipped with different specifications of three Core cable; starting equipment for the different capacity levels of air switch and self-dual decompression starter, the water pipe is made of different diameter steel pipe, flange connection, high-lift pump gate valve control.
2, submersible pumps each stage diversion shell is equipped with a rubber bearing; impeller tapered sleeve fixed to the pump shaft; diversion shell with threaded or bolted together into one.
3, high head submersible pump with a check valve at the top, to avoid downtime caused by water damage to the unit.
4, the upper part of the submersible motor shaft with a labyrinth of sand and two reverse assembly of the oil seal to prevent the flow of sand into the motor.
5, submersible motor with water-lubricated bearings, the lower part with rubber pressure regulating film, pressure regulating spring, composed of surge chamber, regulating the temperature changes caused by the pressure; motor winding with polyethylene insulation, nylon sheath durable consumer goods water magnet wire , Cable connection by QJ-type cable connector technology, the joint insulation off scratch paint layer, were connected, welding firm, with a layer of raw rubber around. And then wrapped with 2 to 3 layers of waterproof adhesive tape, wrapped with 2 to 3 layers of waterproof adhesive tape or a layer of rubber tape wrapped with water (bike belt) to prevent seepage.
6, the motor is closed, the use of precision only bolts, cable exports plus pads for sealing.
7, the motor has a water injection hole at the top, there is a vent, the lower part of a drainage hole.
8, the motor is equipped with the upper and lower thrust bearing on the bottom, thrust bearing groove for cooling, and it is the stainless steel thrust plate, with the pump up and down the axial force.
The submersible pump is a single-suction multi-stage vertical centrifugal pump. The submersible motor is a wet-type, vertical three-phase cage induction motor. The motor and water pump are directly connected by a claw type or single cartridge type coupler. Equipped with different specifications of three Core cable; starting equipment for the different capacity levels of air switch and self-dual decompression starter, the water pipe is made of different diameter steel pipe, flange connection, high-lift pump gate valve control.
2, submersible pumps each stage diversion shell is equipped with a rubber bearing; impeller tapered sleeve fixed to the pump shaft; diversion shell with threaded or bolted together into one.
3, high head submersible pump with a check valve at the top, to avoid downtime caused by water damage to the unit.
4, the upper part of the submersible motor shaft with a labyrinth of sand and two reverse assembly of the oil seal to prevent the flow of sand into the motor.
5, submersible motor with water-lubricated bearings, the lower part with rubber pressure regulating film, pressure regulating spring, composed of surge chamber, regulating the temperature changes caused by the pressure; motor winding with polyethylene insulation, nylon sheath durable consumer goods water magnet wire , Cable connection by QJ-type cable connector technology, the joint insulation off scratch paint layer, were connected, welding firm, with a layer of raw rubber around. And then wrapped with 2 to 3 layers of waterproof adhesive tape, wrapped with 2 to 3 layers of waterproof adhesive tape or a layer of rubber tape wrapped with water (bike belt) to prevent seepage.
6, the motor is closed, the use of precision only bolts, cable exports plus pads for sealing.
7, the motor has a water injection hole at the top, there is a vent, the lower part of a drainage hole.
8, the motor is equipped with the upper and lower thrust bearing on the bottom, thrust bearing groove for cooling, and it is the stainless steel thrust plate, with the pump up and down the axial force.
Brand certification Weihu pump safety deep well submersible pump
Deep well submersible pump is an important product of mineral industry, animal husbandry and agriculture in China. In particular, the use of deep well submersible pumps in agriculture and animal husbandry should pay particular attention to power problems. Rural areas as a result of low-voltage power supply line is relatively long, the end of the line voltage is too low is common. When the phase voltage is below 198 volts, the line voltage is lower than 342 volts, submersible pump motor speed down, when less than 70% of the rated speed, start the centrifugal switch will be closed, resulting in long start-up winding power and even burn Windings and capacitors. Conversely, a high voltage causes the motor to overheat and burn out the winding. Therefore, the submersible pump in operation, the operator must always observe the power supply voltage value, if less than 10% of the rated voltage, higher than 10% of rated voltage above, the motor should stop running, find out the cause and troubleshooting.
Leakage protection device, also known as protectors, its role from the "security device" the three words can be understood. Wei Shanghai pump brand submersible pump has a number of patents, leakage protection is the days of submersible pump submersible pump R & D and production of one of the important projects. Combined with years of market feedback from users under the premise of large data, Wei-hu pump is deep digging the user pain points, increased R & D funds, through continuous experiments to determine the safety of the product. Because the deep well submersible pumps are mostly in the water, easy to leakage caused by power loss and even lead to electric shock accident, equipped with leakage protection deep well submersible pump, as long as the submersible pump leakage value exceeds leakage protection action current value (generally not more than 30 mA), leakage protection device will cut off the power of the submersible pump to avoid leakage of waste of electricity to ensure safety. It is also on this basis, Wei Hu pump produced by the deep well before each submersible pump factory will automatically control the test stand insulation resistance data monitoring to increase the safety of the pump and the use of more. "Never leave troubles" has also been the heart of Shanghai Wei people to product quality strictly to control the best interpretation.
Leakage protection device, also known as protectors, its role from the "security device" the three words can be understood. Wei Shanghai pump brand submersible pump has a number of patents, leakage protection is the days of submersible pump submersible pump R & D and production of one of the important projects. Combined with years of market feedback from users under the premise of large data, Wei-hu pump is deep digging the user pain points, increased R & D funds, through continuous experiments to determine the safety of the product. Because the deep well submersible pumps are mostly in the water, easy to leakage caused by power loss and even lead to electric shock accident, equipped with leakage protection deep well submersible pump, as long as the submersible pump leakage value exceeds leakage protection action current value (generally not more than 30 mA), leakage protection device will cut off the power of the submersible pump to avoid leakage of waste of electricity to ensure safety. It is also on this basis, Wei Hu pump produced by the deep well before each submersible pump factory will automatically control the test stand insulation resistance data monitoring to increase the safety of the pump and the use of more. "Never leave troubles" has also been the heart of Shanghai Wei people to product quality strictly to control the best interpretation.
The reasons for submersible water pumps flow quantity decrease
The reasons for submersible water pumps flow quantity decrease
Submersible pump is a very versatile tool in water treatment. Unlike ordinary water pump it works under water, and water pump work mostly on the ground. Submersible pump installation, use, maintenance convenience simple, cover an area of an area small, do not need to build the pump room. Simple structure, saves the raw material.
Submersible pump compact structure, and only when the work will be in the water pump can be start work, simple installation, convenient movement. Due to its simple structure, small volume, easy to use, so got rapid development. Submersible pump design starting point is "no jams, no winding", some models with a torn institutions or cutting device, can carry sewage long fiber, bags, such as tear out the back.
Open pump, the suction pipe and pump must be filled with liquid. After open pump, high-speed rotating impeller, the liquid with the blades rotate together, in under the action of centrifugal force, fly away from the impeller to injection, injection of the liquid in the pump shell gradually spread of indoor speed slow, pressure increase gradually, and then from the pump discharge, the discharge pipe flow.
Place in the center of the blade due to liquid was dumped into the surrounding formation is no air and no liquid vacuum low pressure area, fluid in the pool liquid under the action of atmospheric pressure on surface of the pool, the suction pipe into the pump, the liquid is continuously from the liquid pool was sucking up and continuously from the discharge pipe flow. Submersible pump eight factors of water or no flow because there are a lot of submersible pump material is cast iron or plastic, if only use these materials to the submersible pump, it is difficult to meet the needs of customers, such as there are many corrosive medium can't emissions, such as sulfuric acid, hydrochloric acid, nitric acid, etc.; This is one of its characteristics. Also features besides not rust, high temperature resistance.
So there are a lot of manufacturers and production of the high temperature resistant stainless steel submersible pump. Although is stainless steel, but there are a lot of auxiliary material is not much high temperature resistant, generally within 120 ° is no problem, such as some chemical plants need high temperature over 200 degrees or choose centrifugal pump. Insufficient in the operation process of 1, submersible pump flow or no flow, the main reason:(1) the pump installation height is too high, not enough impeller submersion depth, led to the decrease of the water pump water yield;(2) water pump to the opposite;(3) water valve cannot be opened;(4) water line is not clear or impeller blocked;(5) the lower pump abrasion and circle severe or debris jam;(6) pumping liquid density or viscosity is too high;(7) loss or damage to the impeller;(8) pumps more common, the output of the line is not installed a one-way valve or one-way valve seal is lax.2, elimination measures(1) to control the pump installation elevation of allowable deviation, an extended arbitrarily;(2) the pump test run before idling motor, check the steering to that of the water pump.
In the process of using the above situation should check whether the power phase sequence change;(3) check valves, and often the valve for maintenance;(4) clean the pipe and impeller clogs, often salvage reservoirs stuff:(5) clean up debris or replace wearing ring;(6) to find the cause of the water quality change and management;(7) to reinforce or change the impeller;(8) add or replace a one-way valve after check the reason.
WQP series stainless steel submersible water pumps models and parameters
WQP series stainless steel submersible water pumps models and parameters
WQP type series stainless steel submersible pump is the introduction of foreign advanced efficiency non-clog submersible pump design experience, combining with the characteristics of the use of domestic water pump and the successful development of a new generation of submersible pump products, energy saving effect is remarkable, winding, no jam, automatic installation and automatic control, etc.
Solid particles in the lining and long fiber waste stainless steel submersible pump has a unique effect.WQP type series of stainless steel submersible pump used in chemical, petroleum, pharmaceutical, mining, paper industry, cement plant, steel mills, power plants, coal chemical industry, and urban sewage treatment plant drainage systems, municipal engineering, construction and other industries containing particles of sewage, dirt, and can also be used for pumping clean water and corrosive medium.
Stainless steel submersible pump adopt unique structure and new type of mechanical seal, can effectively deliver a solid and long fibers. Compared with the traditional impeller, the impeller of the pump impeller with single port or shuangliu form, it is similar to a cross section of bending tube with the same size, has the very good flow, with reasonable volute chamber, make the pump with high efficiency, impeller through static balance test, for no vibration in the operation of pump.
Well with submersible pump installation1. Submersible pump device by water pump, motor, water pipe, waterproof cable and five most control switch, the pump is single-suction multi-stage vertical centrifugal pump.2. The submersible motor structure of strong water wet, inner cavity is filled with water, it is mainly used for motor cooling, and bearing lubrication.
In the process of operation caused by temperature change, the motor cavity flushing pressure changes, can adjust bottom pressure regulating device automatically by a motor.3. To prevent sediment into motor, the motor with a left upper Sha Qi and skeleton oil seal, sand body, the whole department seal structure.
Top 4. The motor is equipped with water injection hole and vent, the bottom has a plug-hole.5. Lower motor equipped with a thrust bearing thrust plate, mainly bear residual axial force of pump and motor rotor of self-respect.6. Motor stator winding adopts water resistant electromagnetic wire, good insulation and resistance to water, for squirrel-cage rotor structure.
Features and principles of high lift submersible water pumps
Features and principles of high lift submersible water pumps
The characteristics and principle of young pump release date young pump features:AT540QJ mine submersible pump series features:
1, motor, water pump, body, run into the water, the Mars, explosion-proof, safe and reliable.
2, no special requirements for well tube, for delivery as long as can withstand the pressure can be accordingly.
3, installation maintenance convenience simple, cover an area of an area small, do not need to build the pump room.
4, simple structure, saves the raw material.
5, high efficiency, energy saving, single-stage high head, large flow, high head, imported high efficiency and energy saving motor, such as: Germany AT200QJ series submersible motor can do 110 kw (maximum overall diameter 184 mm), level 2 speed 410 kw (2900 / min) can do
Using the environment and conditions1, power frequency 50 hz, rated voltage of 300 v or 660 v or high voltage 6 kv, 10 kv (tolerance of + - 5%) of three-phase ac power supply.2, solid content (in quality) is not greater than 0.01%.3, shout by pumping liquid acid degree of PH value of 6.5 to 6.5.4, medium temperature not to exceed 20 ℃.5, water pump inlet must be below the water level dynamic lm, but diving depth is less than the static water level to 70 m, electric pump bottom hole depth at least lm.6, requirements well integrity, wall smooth, well tube shall not stagger. Structural characteristics of1, ATQJ mine submersible pump series, consists of two most, diving three-phase asynchronous electric and water pump.
Motor pump with its upper body straight, the motor shaft top a reliable shaft sealing device, can effectively prevent the cooling fluid for electric motor and the exchange between pumping medium, guarantee the pump running safely and reliably for a long time.2, submersible pump is single-suction multi-stage vertical centrifugal pump;
Submersible motor for filling water wet, vertical Wells with diving asynchronous motor. Motor and pump through drum coupling straight league.3, motor winding for polyethylene water resistant nylon sheathed electromagnetic wire. Motor cavity filled with clean water.4, guide bearing with water lubricated bearing of the electrical machinery. Lower part of the motor cannot bear water pump axial force of the thrust bearing, high lift water pump of thrust bearing with nickel copper fan, and it is import for the grinding of Loeb, skateboard, inherit and axial force of pump.5, young water pump in the middle of the pump and motor additional axial force bearing, head can be raised to 1500 m.
订阅:
博文 (Atom)