2016年12月6日星期二
2016年12月5日星期一
Characteristics of hot water submersible pump
Characteristics of hot water submersible pump
Stable operation: absolute concentricity of pump shaft and impeller excellent static and dynamic balance, to ensure the smooth operation, no vibration.
Leak: not the same material of hard alloy sealing, to ensure that the different medium transportation without leakage.
Low noise: two low noise bearings supported by the pump, the work of smooth, in addition to the weak noise of the motor, basically no noise.
Failure rate is low: the layout is simple and reasonable, the key part of the international first-class quality; matching, the whole machine working time is greatly improved.
Repair convenient: replace the seal, bearing, simple and convenient.
An area of more provinces: export can be left, right, up three directions, to facilitate the installation of pipeline layout, saving space
Attention to the use of submersible electric well pumps
1. Check and make sure that the electric water pump rotates in the right direction.
2. After closing, and observe the reading operation noise current meter, to determine whether the normal operation of the electric water pump. If there is abnormal, should immediately stop the inspection.
3. Often detect the operating voltage of the electric pump, after deducting the voltage of the cable, the voltage of the motor winding directly supplied to the motor should be 342-418 volts.
4. The operating current of the electric pump should be checked regularly, and the value of the pump should not exceed the rated current when the pump is running.
5. Ptest the insulation resistance of the motor winding, and its value should not be less than 500 billion ohm when working near the operating temperature.
6. Rand in accordance with the provisions of the protection switch to correct the overcurrent relay or overheating relay action current, so as to avoid the wrong action or loss of overload protection function.
7. Oil filled electric pump if the lack of oil and stop turning, should be timely electric water pump, and timely supplementary insulation oil; when the oil leakage insulation oil more and float to the water, it should be removed, so as to avoid corrosion of the cable.
8. Should not frequently open, stop well submersible electric pump.
Advantages of vertical mixed flow pump
1. Operation simple horizontal pump, because the impeller is above the water, before the pump starts, to use a vacuum pump to pump water, because the vertical pump impeller, generally submerged in water, can be directly launched.
2. Installation area contains the driver, including the vertical pump, only half of the space on the pump to meet the. Especially in the large pump today, this advantage is more outstanding.
3. Is conducive to prevent cavitation vertical pump impeller generally submerged in water, you can use the NPSH can take a large number of. Thus, the pump running at a greater than the planning point of the flow will not attack cavitation.
But because it is a vertical, longitudinal longer pump, disassembling and assembling crane hoisting height is higher, above the pump to have space to meet, this is the disadvantage of the vertical pump. However, the vertical mixed flow pump is simply installed outdoors, so it will not become a question.
订阅:
博文 (Atom)